The Class 1 Division 2 LED Exit Sign is designed for use in hazardous locations. This Class 1 Division 2 (Groups A, B, C and D rated) exit sign includes battery backup and comes standard as a single-sided unit which is capable of back (wall) or top (ceiling) mounting. The SVX-NHZ-1-R-D is ideal for industrial locations where explosive gas or vapors could accidentally be introduced to the working environment
The SVX-NHZ-1-R-D is offered with choice of red or green letters, as well as single and double-sided configurations. This model can be shipped in less than two weeks and is available for expedited production time and shipping options. This Class 1 Division 2 LED Exit Sign includes a self-diagnostic, automated self-testing which eliminates maintenance requirements while satisfying OSHA requirements. All fixtures come with a top (ceiling)/back (wall) mounting bracket and usually ship out in less than one week. To receive a price quote or ask any question you might have about the specs and lead time, please call us at 800-282-5600 to speak with an expert.
The SVX-NHZ-1-R-D is constructed with a 1/8" thick aluminum backplate that will not dent, peel or corrode. The 'EXIT' faceplate is made of polyvinyl chloride, and includes a gasket that prevents liquid or gas ingress to the sign. Tamper resistant screws seal the faceplate to the backplate, creating a seal around the battery, circuits and LED strip inside.
This Class 1 Division 2 LED Exit Sign model has many options to choose from. Choose between single or double face units. Choose Red or Green LED light sources, depending on your location and the other signs around. Also decide if you want a Ceiling or Wall Mount conduit bracket.
This SVX-NHZ-1-R-D model includes a rechargeable Nickel Cadmium (Ni-Cd) battery pack. It provides emergency backup power to the exit sign for at least 90 minutes, and only requires 48-hours to fully recharge. Ni-Cd batteries have the highest heat tolerance compared to other emergency batteries.
Since UL, OSHA and all city Fire Codes require monthly operational tests, the Self-Diagnostics feature feature is an obvious time and cost saving solution for maintenance teams. It will constantly monitor the battery, circuits and LEDs as well as perform a 30-second test monthly and a 90-minute power failure test every six months. An LED indicator light will flash red if any fault is detected, alerting maintenance personnel.
- Suitable for Class 1 Division 2 Hazardous Locations, Groups A, B, C and D
- Includes Self Testing microprocessor.
- T6 Temp. Code - up to 185° F.
- 1/8" thick aluminum backplate with a gasketed plolyvinyl faceplate.
- Choose high output Red or Green LEDs.
- Easy snap-out directional chevrons.
- Evaluated to UL924 and UL844 standards.
- Includes long-life 4.8V Nickel Cadmium (Ni-Cd) battery pack.
- Dual primary 120 or 277 VAC operation.
- Choose wall or ceiling j-box mounting.
|Codes & Standards:
|CSA Listed to UL924, UL844 and UL1598.