It's almost Winter. Your ski resort and lodge is opening soon and you need weather resistant backup lights in the outdoor areas and ski slopes. However, you read that the emergency light batteries can rupture when repeatedly exposed to cold conditions below 40°F. How do you protect your guests and your investment?
The answer is Buy the Cold Weather MR16 LED Outdoor Emergency Light, a wet location-ready fixture ideal for high-pressure hosedown areas and snow storms. In addition to the waterproof capabilities of the CP Series, the "IH" option places a self-powered shroud around the Ni-Mh battery, maintaining the battery temperature in temperatures as low as -4 °F.
The CP-EMW-8-LED-BR-IH1 is designed with a pleasing rounded die cast aluminum backplate that is powder coated with a corrosion-resistant satin-aluminum finish. Two (2) 3.6W MR16 LED heads provide ample lighting and are not affected by cold weather like halogen and fluorescent. A clear, UV stabilized polycarbonate faceplate protects the lighting heads from vandalism, water and dust.
The CP Series is UL Wet Location Listed and IP66-rated, and all connecting pieces are sealed with a silicone gasket that prevents dust, moisture or water from leaking into the fixture.
The MR16 LED Wet Location Emergency Light can be mounted to just about any wall or ceiling surface via a universal knockout pattern and key hole slots in the mounting backplate, which are also sealed with a neoprene gasket.
Battery and UL Testing
The CP-EMW-8-LED-BR-IH1 is packaged with a 6V Nickel Metal Hydride battery that supplies emergency power for at least 90 minutes. Ni-Mh gel-type batteries do not require top-offs or outgassing, and will last up to eight (8) years and has a higher temperature threshold than sealed lead acid batteries.
The battery heater is self-powered and monitors inside temperature at all times. Whenever the temperature drops below 40°F, the warmer kicks in and compensates, maintaining the batteries optimal working condition.
- Heavy duty cast aluminum housing powder coated with satin-aluminum finish.
- Clear vandal-proof polycarbonate lens.
- Two (2) front-mounted adjustable 3.6W LED MR16 lamp heads.
- Fully gasketed enclosure protects from moisture ingress.
- cULus Listed and meets UL924, NEC, NFPA 101 and IP66 ratings.
- Dual 120/277VAC input.
- Operating temperature is 50°F to 104°F
- 6 Volt Nickel Metal Hydride (Ni-Mh) battery is included.
- Includes stainless steel straps for surface mounting.
- Includes internal battery heater which increases the temperature threshold to -4° F.
|Light Emitting Diode (LED)
|(2) adjustable 3.6W LED MR16.
|Universal. I-beam optional.
|Codes & Standards:
|cULus, UL924, NEC, NFPA 101 and IP66 ratings.