The inspector says you need two battery backup lights installed by Monday, or your liquor store gets closed. You need a red exit sign in the bathroom hallway and an standby light to illuminate the floor. What is the best way to reduce installation costs and periodic maintenance after its installed? With just one of our two-in-one Red LED Exit Emergency Light Combo with Self Test - that's how!
The MINI-CSQ-WR-SDT uses all LEDs for the exit sign and adjustable emergency flood lights. The advantage is a bright, crisp lighting cone and a light source that will never require lamp swap-outs. Its handy Self Test microprocessor performs monthly and yearly battery discharge tests required by UL, greatly reducing your maintenance costs. And because LEDs consume so little power, you save on energy as well!
The MINI-CSQ-WR-SDT is constructed with a flame and corrosion resistant 5VA thermoplastic housing, available in a white or black finish. It includes two removable red 'EXIT' stencil faceplates and a solid backplate, for single or double sided application. The stencil plates have knockout directional chevrons (arrows), and will adapt to any exit strategy.
The Red LED Exit Emergency Light Combo with Self Test also includes a universal mounting plate and canopy that allows for ceiling, end or back installation. On either side of the sign are square plastic LED emergency lamp heads. They can be aimed and locked at any angle in a full 360° axis.
This MINI-CSQ-WR-SDT model includes a 6-volt Nickel Cadmium (Ni-Cd) battery pack. These AAA sized batteries will power the lights and sign for a minimum of 90 minutes per UL924 code.
UL, OSHA, NEC, local and state authorities require battery backup lighting be tested periodically: monthly for a 30-second battery test and every six months for a 90-minute battery discharge. Our patented Self Test feature does all this for you, and will constantly monitor the battery, LEDs and circuits, alerting you the second an issue is sensed.
- Self Test saves maintenance costs and increases battery longevity without human interaction.
- Damp rated, flame resistant thermoplastic housing.
- Choose a white or black finish.
- Includes two (2) stencils, one (1) backplate and one (1) mounting canopy.
- Energy efficient Red LEDs.
- Two (2) adjustable square lighting heads with (7) LEDs each
- Knockout directional chevrons
- Dual primary 120 or 277 VAC operation.
- UL Listed for damp locations.
- Includes 6V Nickel Cadmium battery pack.
- Fully automatic solid-state, two-rate charger.
|Depth:||2.0"||Lamp Heads:||(2) 7-LED square.|
|Weight:||8 lbs||Power Consumed:||8W|
|Mount Type:||Universal||Codes & Standards:||ETL to UL924, UL Damp Listed, NEC.|